Dental Portable Digital Film X Ray Unit Imaging System Mobile Unit LK-C26 Plus

This model combines the advantages of similar products found at home and abroad; it eliminates the shortcomings of the on-frequency X-ray machine. Using a Toshiba 0.3 micro-focus tube.The tube voltage frequency of this machine is 30 KHz, and the tube current is 1 MA. The radiation scope is at an angle of 24 degrees, located within a distance of 1.2 meters ahead. TECHNICAL SPECIFICATIONS: Tube Voltage: 60kV Tube Current: 1mA Time Exposure: 19s High pressure generator: 30kHz DC Rated Power: 60w Focal Spot To Skin Distance: >20CM Focus Spot Size: 0.3mm(TOSHIBA) Charger Input Voltage: AC110V ~ 220V Supply Frequency: 50Hz+1% Radiation Leakage: <20ugy/h Battery: 24V DC 8000MA Weight: 2KG Dimensions: 25 cmx11..5 cmx17cm (LxW×H) Setting the time (Skip to next step if unneeded) "+", and"-" buttons to reset the time as follows: press SET, the pilot lamp above is illuminated, the machine is now in the time setting mode→then press "+" and" -" to set the time needed (time range is 0.1-1.8seconds); The equipment is now in standby mode. Put the Tooth film plumb behind the tooth which is going to be taken picture, and be as close as possible (the smooth side stick to the tooth) Keep the ball head plumb to the tooth projection position; Have the ball head, tooth, and tooth film steadily mutually plumb. After positioning, use the ON/OFF on the main Unit, to take pictures. (Notice: gently press 0.5 sec to turn it on)