Lucky Brand 🍀 pierced leather belt NWT
NWT
$22 $39
Size
Not for sale
Like and save for later
Beautiful Lucky Brand brown leather belt with pierced medallion design. Never worn. No visible defects, may show slight wear due to handling and display. Medium size. Lucky's site says this accommodates a pant size 32. I would say 31-33 based on actual measurement.
Color
Shipping/Discount
bagladyish1970
and
20 others
like this
21 Comments
sstandifird
I'm a 29/30 waist in jeans. Would this fit probably?
cydnew
It would be close. Currently, I wear a 31 and this fits around the smallest part of my waist over my clothing. Also, most jeans seem to sit a few inches below the natural waist.
I measured the circumference and on the smallest setting it is 34". So measure around your waist on top of the pants you would wear it with. It's probably 2-3" greater than your actual waist/jeans size.
cydnew
Finally, if you look in the pictures, the center of every other design has an open hole the same size as the holes for the buckle, so you could use one of those. The next in line puts the belt at 31" in circumference.
Hope that helps!
@sstandifird
sstandifird
Thank you for your explanation. I really appreciate it.
margeyk1
I just wanted to clarify from your prior conversation. The smallest the belt will go is 34 inches?
bagladyish1970
Hi! I have a 15 year old dog that is my world and im going to need something to remind me everyday when im sad how lucky ive been to get to spend 13 awesome years adventuring together. Would you create me a snap cuff bracelet in his honor? My wrist is 7.5”
bagladyish1970
His name is Gillian but I call him everything but! G-Man, G-Love, Munkee Man, Gilly Gorilly, Gilly McSilly Pants, etc., is there a way you could do a reversible piece of metal embossed on each side? One side with: I_Witness and the other side with Gillian on it? I love the brown color of this belt or darker and I really like the punched radial design on it too. Would you let me know if you’d do it and also how much you’d charge for it?
cydnew
@bagladyish1970 I would love to make a cuff for you in honor of your dog!
I usually charge $30 for custom work with one stamped plate. I can't actually stamp on both sides because hand-stamping leaves an imprint on the back. I could possibly rivet two pieces together though. With a second plate, I would go $34 so that it would stay close to $40 with the shipping.
cydnew
If that sounds good to you, please let me know and I will post some pictures of leather similar to this belt, and we can get started.
Also, I do have children who are now have school at home :) so my turnaround time might be 1-2 weeks, though possibly faster.
bagladyish1970
@cydnew yes that sounds good to me! Anything sort. madala ish looking for the leather with 2 brass snaps to fasten 2” wide piece of leather to fit 7 3/4-8”, cognac or caramel like color. Could also be suede.
cydnew
@bagladyish1970 perfect! I was just coming to ask what color of metal you liked!
I've pulled out some of my stash and will add some pictures tomorrow.
bagladyish1970
@cydnew i do really like rustic old looking brass hardware and weathered leather so if you have any when you go through your assortment, id love to see them. Im so happy you want to do this, it means a lot to me❤️
cydnew
@bagladyish1970 I just added 5 photos with some fun leather. I didn't have many that are pierced right now, but I did have lots of fun aged leather and brass :) Some of my favs also!
Finally the last picture has a thinner belt, that could be a double wrap with two separate word plates. OR the large belt in that picture is one belt that looks great on both sides. You could do a small word plate on both sides. The biggest challenge would be the clasp so that it could attach either way.
cydnew
Also, let me know if you want better pictures of any of them as we narrow it down!
bagladyish1970
@cydnew whaaat?!? Omg such beautiful leather oh!!!
bagladyish1970
@cydnew now I’ll need to look and be thoughtful about these tomorrow. Gilly will tell me what he thinks is most fitting. I’ll let you know before bedtime tomorrow which one... or i may ultimately ask you to choose (im a Libra, it’s practically impossible for me 😔)
cydnew
@bagladyish1970 I understand :) If you can narrow it down to your top favs that will be a good start.
bagladyish1970
@cydnew what if you did a toggle closure so it could work for either side🤔?
bagladyish1970
@cydnew
i do like the in the 5th photo one all the way to the right and then also like the 7th photo down, the leather in the middle. If you needed to do a chunky brass toggle and ring, that would look cool with the brass elements in the cuff? Id be totally be willing to pay more for great looking secure closures to complement the work you’r doing with the belt and name plates
cydnew
@bagladyish1970 I love the toggle idea! I will get going on things as far as the leather and hardware. Now, we just need to figure out what you want it to say.
I do have a small heart stam, I was thinking of one plate with just his name and two little hearts to represent both of you. What do you think?
cydnew
And then "I_Witness" just like that? The underscore with it, right? Want to make sure before I stamp things because they don't come out, 🤣
Trending Now
Find Similar Listings