Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with 0.6"-1.5"Clamp

🧿Upgraded Alligator Clamp-Patented Design: Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles 🧿Easy to Install on 0.6"-1.5" Pole: The alligator clamp of this kayak cup holder fits 0.6"-1.5" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design. 🧿24oz Max Load Capacity: The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out. Not Compatible with Road King, Spyder RT, Burgman 400s. 🧿With Tightening Drawstring: The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride. 🧿Sturdy Fabric with 2 Separated Mesh Pockets: Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, sturdy and washable. Don’t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.